www.flightsim4fun.com - rksoftware

Did you replug to the same USB-Port?
Maybe the USB-device-number changed and you have to modify your sioc.ini to reflect these changes?

I finally decided to connect all analog inputs via Opencockpits "USB Axes Card", so I was able to simply assign those inputs via FSUIPC (registered). Up to now my DCmotor card is not used. I mounted these motors in my Throttle: http://www.conrad.de/ce/de/product/442016/Motor-Potentiometer-...

To use any opencockpits hardware, you need a programm called "SIOC" (you can get it at the opencockpits website for free), that does the communication between your hardware and the Sim, usually via FSUIPC. For all addons that do not use the Standard FSUIPC offsets, you need a special drive...

As far as I know it is not possible to use any Opencockpits hardware with the old PMDG B747 - at least in FSX, because the addon does not use standard offsets and no SDK has been released. For the upcoming PMDG B747 v2 an SDK will be released and I think the driver for the OC-Modules will be release...

if I leave and put MASTER = 30,4,3, X the OC4BAconfig me recognizes it as OVHD. This is because the overhead panel also consists of an expansion card with 2 Master Cards. In OC4BA.ini you can find a line [idx]. Below these line the supported modules are assigned to certain IDX numbers used in the s...

As far as I know the SIOC only recognises the expansion Card, not the attached Master Cards, so you need Master=30,4,3,x. As each expansion card can carry up to 4 Master cards, this could go up to Master=30,4,4,x (if you ever install a fourth Master card). The different Master cards are recognised b...

Hi, it is possible to work with the IO-Cards instead of plugplay modules, but it requires quite a lot of changes to the scripts provided with the ocp4ngx driver. First of all, if you are using an expansion card with 3 connected master cards instead of MXP & EFIS, you can not use the device numbe...

I found no way to send you the script via PM, so i attached it here. As said above, there are still some issues in the script. 1.) I wasn't able to get the fire handles working. I tried to work with the events 2433-2438 and 2441-2443, but as I didn't get it to work, I deleted the code. I only left t...

Hi, I will answer more deeply later, on the run now.. But, didn't you receive my email about the new updates of programs and scripts. Curious to see if my broadcast email system works? The 2.9b script + the events/vars listing should be on my ONEDRIVE using the link in the broadcast email. Just run...

Hi, after some more testing I was able to get some of the points mentioned above solved, but some of them still remain: [...] I [...] noticed a few problems: 1. The servos on the OHP don't move. I can move them via SIOC monitor so the hardware is ok, but for some reason they are not working in the s...