www.flightsim4fun.com - rksoftware

Hi, I have just tried flying with the Airbus and for some reason the MCP, EFIS and Com have stopped communicating with the sim. I only see 999 in the MACH and zeros in all the other screens. If I adjust the altitude etc on the MCP the numbers do change but not in the sim. I have tried uninstalling t...

After extensive testing and excellent support by Roar through Teamviewer, a new script was supplied and the problem is now solved.

Thanks Roar for all your help.

Roar, i have just sent you a PM.

Roar,

I have Teamviewer installed now just in case. Ill take a look later in IOCP Monitor and if needs be ill send the email.

Many thanks Roar

Hi Roar,

You have lost me now completely!!
How can I invite you on Teamviewer?

If I understand you right, all thousands shows up OK on MCP, both +/-. This by reading what you say and looking at the LOG output in IOCPConsole image To me this is the way it should work if the ALT INCR SW is set to 1000 ( CWS_A push button on MCP HW amd Var 2525 in SIOC) Yes I understand that but...

Hi Roar,

Yes the hardware works fine in the Ifly 737 that I use regularly using SIOC.

I'm at work at the moment but Ill try what you suggest later and report back.

Hi Roar, I have tried as you suggest. This happens on the ground as well as in the air by the way. When running IOCP Console the DEC Value for 1373 shows the correct setting that I dial in. I have tested again tonight and I have noticed that if I change the VS dial back to zero, the display on the M...

Everything is working fine apart from the V/S. I select V/S on MCP and dial in say +2000 fpm using the V/S dial. In the sim the 2000 will show but then if i alter the dial at all to say 2200 fpm it still shows 2000 on the MCP but the sim WILL show the changes. I am using the 777 only, I dont own the...

Roar,

Even with the latest updates installed I still do not get the V/S display correctly on the MCP. It works for a second then stops working. In the SIM its working.
Have you any ideas what may be causing this issue?

thanks