Display card output Digit 64-73

Forum for the OC4BA v2/v3 and OC4BAConfig including the OCP4NGX driver
Post Reply
ridnert
Posts: 25
Joined: Wed Jan 08, 2014 10:07 am

Display card output Digit 64-73

Post by ridnert »

Hi Roar
Trying to figure out where to connect the digits 64 to 73 for the Flight height numbers? Any tip?
Have the outs card set in Bank 2-3 and will use Bank 1-2 for the display card for Electrical panel. But the farest a Display card can connect to is up to digit 63, and also the outs card. Or...
Brgds Thommy
mvr1918
Site Admin
Posts: 1630
Joined: Thu Aug 30, 2012 3:35 pm

Re: Display card output Digit 64-73

Post by mvr1918 »

Hi,

You need a minimum of 2 7-Segment DISPLAY CARD II for both the Electrical Metering Panel and FLTALT/LNDALT display

The Outs Card is for LEds only , to my knowledge.
Post Reply