Page 1 of 1
Transponder not visible in OC4BA[SOLVED]
Posted: Thu Dec 26, 2019 11:27 am
by PH-JRJ
Hi Roar,
yesterday I started up my Sim and discovered the transponder module was not active anymore.
Checked Sioc and no IDX number assigend. Openend OC4BA config to re configure it and saw the module is not visible anymore in the modules part. Tried a new port on my USB hub, no luck.
Any sugestion for me to get it solved?
Thanks
Best regards
Remco
Re: Transponder not visible in OC4BA
Posted: Thu Dec 26, 2019 11:45 am
by mvr1918
If it does not show up in Modules it is not detected by SIOC and the USB is not active in Windows.
Start SIOC and check device window. Is it visible there? Probably not if not in OC4BAv4's modules list.
Check in Windows Control Panel/ Devices and Printers.
Re: Transponder not visible in OC4BA
Posted: Thu Dec 26, 2019 12:09 pm
by PH-JRJ
Hi Roar,
Thanks for the quick reply. See my screenshot module is visible in Sioc ans also able to test switches ans display in the Sioc monitor.
It is also visible in USB devices and printers and the OC4BA ini file
Best regards
Remco
Re: Transponder not visible in OC4BA
Posted: Fri Dec 27, 2019 10:28 am
by PH-JRJ
Rehomed the ATC module to a free port on my second hub and all working again. Strange problem Windows related I guess.
Topic can be closed.
Best regards
Remco
Re: Transponder not visible in OC4BA[SOLVED]
Posted: Fri Dec 27, 2019 11:28 am
by mvr1918
Sue Bill Gates and Microsoft:)
Re: Transponder not visible in OC4BA
Posted: Fri Dec 27, 2019 11:47 am
by PH-JRJ
I wish it was as stable as your software!! next time I will look in Windows first before I disturb you.
Best regards
Remco
Re: Transponder not visible in OC4BA
Posted: Tue Jan 07, 2020 9:07 am
by mvr1918
Marked as SOLVED